Roger Newman & Sons
Designers & Makers
Soap cutters & Soap Moulds
Electric Hydraulic Soap Cutter
Hotel Bar Harp
10 mm spacing
H1HE Electric Hydraulic Soap Cutting Machine
This soap cutter is a heavy machine designed to cut large blocks of cold process soap up to 16” +16” + 18” inches,
or 40 cm + 40 cm + 46 cm high.
Cutting slabs accurately on the first cut, then into logs on the second cut, the third cut being into bars.
The harps are fitted with 1mm steel wires set to the spacing you order, each wire is individually tensioned by tensioning bolts. Removing four bolts changes the harps, with the harp you need.
The machine is portable with its own wheels and is operated with two easy to use handles set on top of the machine..
It is possible with a little skill to arrange on the final cut, to shape the bars into various shapes other than rectangles and squares
The harps needed will be dependent on the size of soap you want to cut and moulds used.
The inside dimensions of the harps or frames are 17 inches by 17 inches -= 43 cm this allows a soap block size of 16 inches by 16 inches to be cut , the depth of the cut is dependent on the size of mould, but the H1HE has a maximum depth of cut of 18 inches =46cm
The H1H E is a powerful machine machine able to cut large blocks of cold process soaps smoothly without leaving any marks on
the cut soap, the user only has to operate the two handles
It requires a 230 volt household supply 13amp
All Hydraulic cold process machines Electric and foot operated
can be fitted with a base plate to fit the mould
bottom so that the mould can be de moulded on the machine , this requires moulds to be ordered for the particular size
of harp used.
Hydraulic machines can be fitted with cross harps saving even more time when cutting
Roger Newman & Sons, Byrfon, Gwernogle, Carmarthenshire
Wales, SA32 7RY
Tel 44 01267202355
Copyright©2017 Roger Newman & Sons